ABB PFCL201C 10KN
- Permitted Transverse Force: For a nominal load of 10 kN and a height (h) of 300 mm, the permitted transverse force is [specific value] kN. This value indicates the maximum force the load cell can withstand in the transverse direction while still maintaining accuracy.
- Permitted Axial Load: With a nominal load of 10 kN and height (h) of 300 mm, the permitted axial load is [specific value] kN. It shows the maximum axial force the load cell can endure within the accuracy limits.
- Extended Load: The maximum extended load in the measuring direction with an accuracy class of ± 1% is [specific value] kN. This extended load capacity is useful in applications where there may be occasional higher forces.
- Max Permitted Load: In the measuring direction, the maximum permitted load without permanent change of data is [specific value] kN, and in the transverse direction (for h = 300 mm) is [specific value] kN. These values represent the absolute maximum forces the load cell can handle without being permanently damaged.
- Spring Constant: The spring constant for the 10 kN load cell is [specific value] kN/mm. This parameter is related to the stiffness of the load cell and affects its response to applied forces.
Product Specifications
- Model Number: PFCL201C 10KN
- Manufacturer: ABB
- Dimensions: The exact dimensions may vary, but as an example, for similar load cells in the series, they might have a length of around [X] mm, width around [X] mm, and height around [X] mm (specific values can be found in the detailed product manual). These dimensions are designed to fit into standard industrial setups with ease.
- Weight: Approximately [weight value] kg. The weight is an important factor to consider during installation, especially when determining the mounting requirements and the structural support needed.
- Connection Type: The “C” in PFCL201C indicates a specific connection type. It has a [description of connection type] connection, which offers convenience in installation and maintenance, allowing for easy disconnection and reconnection as needed.
