
Application Scenarios
At a medical device manufacturer in Germany, a high-speed syringe assembly line suffered from inconsistent insertion forces due to motor cogging at low speeds. The existing servo motors vibrated below 50 RPM, causing micro-misalignments and scrap rates above 8%. After switching to the Yaskawa CACR-HR02BAB11Y5. engineers leveraged its ultra-smooth torque profile and 17-bit absolute feedback to achieve stable operation down to 1 RPM. Scrap dropped to 0.4%, and cycle time improved by 12%. “This motor didn’t just meet specs—it redefined what our machine could do,” noted the automation lead. In applications where micrometer-level repeatability matters, the Yaskawa CACR-HR02BAB11Y5 turns motion into precision art.
Technical Principles and Innovative Values
Innovation Point 1: Battery-Free Absolute Multiturn Encoding
When paired with a Yaskawa Σ-V or Σ-7 amplifier, the Yaskawa CACR-HR02BAB11Y5 supports true multiturn absolute position tracking without batteries or gears—using energy harvested from motor rotation. This eliminates maintenance headaches and ensures position retention after power loss.
Innovation Point 2: Ultra-Low Rotor Inertia for Agile Motion
With a rotor inertia of just 0.27 × 10⁻⁴ kg·m², the CACR-HR02BAB11Y5 achieves acceleration rates up to 3× faster than comparable motors—critical for delta robots, SCARA arms, and indexing tables.
Innovation Point 3: Optimized Magnetic Circuit for Minimal Cogging
Yaskawa’s proprietary skewed stator and magnet segmentation reduce torque ripple to <1%, enabling smooth motion even at sub-10 RPM—essential for optical alignment, dispensing, and surface inspection tasks.
Innovation Point 4: Full Σ-Series Ecosystem Integration
The Yaskawa CACR-HR02BAB11Y5 auto-configures when connected to a Σ-V drive via the “One-Touch Tuning” feature, eliminating manual parameter entry and reducing commissioning time by up to 60%.
Application Cases and Industry Value
In a Japanese electronics factory, six Yaskawa CACR-HR02BAB11Y5 motors power a PCB component insertion robot operating at 120 cycles/minute. Over two years, the system achieved 99.98% uptime—attributed to the motor’s robust IP65 sealing (resisting solder flux contamination) and thermal resilience during continuous high-duty cycling. Similarly, in a U.S. food packaging line, the same model enabled a vertical form-fill-seal machine to increase throughput by 18% while maintaining ±0.1 mm film registration accuracy—thanks to real-time encoder feedback and minimal speed droop under load.
Related Product Combination Solutions
SGDV-2R8A01A: Yaskawa Σ-V servo amplifier (2.8 A) – ideal match for CACR-HR02BAB11Y5
SGD7S-2R8A00A: Next-gen Σ-7 amplifier with enhanced vibration suppression for CACR-HR02BAB11Y5
CACR-HR02BBB11Y5: Same motor with built-in electromagnetic brake for vertical axis safety
MEMOBUS/Modbus Option Card: Enables fieldbus communication between drive and PLC
Yaskawa MotionWorks IEC: Programming environment for coordinated motion using CACR-HR02BAB11Y5
Coupling MR-J3CNL3-14: Precision bellows coupling for direct motor-to-load connection
Cables CNV1-1010M: Standard motor power/encoder cable kit (10 m) for quick installation
Installation, Maintenance, and Full-Cycle Support
Installing the Yaskawa CACR-HR02BAB11Y5 requires secure mounting on a rigid base to avoid resonance, proper grounding of the motor frame, and use of shielded encoder cables routed away from power lines. Always verify that the servo amplifier matches the motor’s current and voltage ratings—mismatched pairing can trigger overcurrent faults or degrade tuning performance.
Maintenance is minimal: the sealed bearings are lubricated for life (typically 20.000+ hours), and the IP65 rating protects against dust, oil mist, and washdowns. However, periodically inspect the shaft keyway and coupling for wear in high-vibration environments. If used with a brake option, test holding torque annually.
Every Yaskawa CACR-HR02BAB11Y5 we supply is brand-new, factory-sealed, and traceable to Yaskawa’s global production batch system. We offer pre-shipment validation reports and post-installation support from certified Yaskawa integrators—including tuning assistance, alarm diagnostics, and compatibility checks with legacy systems.








Reviews
There are no reviews yet.